- Cable:
5/32" galvanized aircraft cable.
- Winch:
Standard two-way rachet winch. Operates similar to a bumper jack. It may be jacked down, one notch at a time until the load is removed, after which the cable may be pulled out freely.
- The Adjustable Wall Stop
must be pre-set for the proper wall height. Various settings are listed on the decal. (Settings are approximately 1.45 times the wall height.)
- Lifting
is accomplished by the ratchet winch. Loads may be raised or lowered by setting the up-down lever.
- Double Headed Nails
secure the hinged floor plate to the subfloor. If on concrete, a plank may be extended to a solid object and used as a substitute. The plank must be secured to prevent it from slipping or lifting during the wall lift.
- Telescopes
to the closed position for storage and hauling.
